Table of Contents
Advertisement
1 Plug the AC adaptor
cable into the adaptor
jack located on the rear
of the charger.
2 Plug the AC adaptor into
an AC outlet.
3 Slide the NiCd battery
pack or the transceiver
equipped with a NiCd
battery pack into the
charging slot.
•
Make sure the metal
contacts on the battery
pack come in contact
with the charging
terminals.
•
The charger LED lights
and charging begins.
4 After charging the
supplied KNB-14 battery
pack for 8 hours, remove
it or the transceiver from
the charger.
•
The charger does not
turn OFF automatically
after charging is
completed.
5 Unplug the AC adaptor
from the AC outlet.
Note: It takes approximately 15 hours to fully charge the optional
KNB-15A battery pack.
17
Advertisement
Table of Contents
