Majestic fireplaces BFC36 Homeowner's Installation And Operating Manual page 22

BFC36 Balance Flue Heat-Circulating Fireplace
Component
Chimney Support
Firestop
Attic Insulation Shield
Traditional Top Housing
Housing Extension
Contemporary Chase Top
Termination
Chase Top Housing
Contemporary Flashing
Chimney Sections
Chimney Elbows
Round Top Termination
Extended Round Top Chase
Termination
Adapter Kit
Adapter Kit
22
Chimney Components
Description
Used to support chimney for each of
30' vertical height and 6' of angled chimney run
Required at each floor level and attic on
multi-story installation
Required in Canada
Top housing of simulated brick pattern
available in red, tan or white. Appropriate
adapter is required (8CA). Flashing included.
Extends Traditional Top Housing on
steep pitched roofs
Used to terminate chimney at the top of a
chase. Flashing is not included.
Adapter Kit (TT8CB) is required.
Used with chase terminations to prevent rain entry.
Required for Contemporary Round Top
termination to prevent rain entry.
Used to build chimney systems.
Used to develop offset chimney systems.
Only 30° elbows are available. (Elbows
packed 2 per carton - upper and lower
elbow set.)
Used to terminate chimney on the roof.
Flashing not included.
Used to terminate chimney at the top of a
chase. Adapter Kit included. Flashing not
included.
Required to connect triple-wall chimney
with Traditional Top Housing (T20B or TL20B)
Required to unite chimney with
Contemporary Chase Top. (TT200C)
Model Number
TCS8A
(8" flue)
FS2A (8" straight flue)
FS6A (8" 30° inclined flue)
FS2100HT
T20B
(single flue)
TL20B
(extra tall single flue)
202036
(single flue)
TT200C
FL88
(8" flue)
8-6-12 with 8" flue
0 to 6/12 pitch
8-12-12 with 8" flue
(6/12 to 12/12 pitch)
8" flue
81 (1' long)
818 (1¹⁄₂' long)
83 (3' long)
84 (4' long)
830A-2
(8" 30° flue)
RT8C
(8" flue)
RT8CL
(8" flue)
8CA
(8" flue)
TT8CB
7412647