JVC GZ-MC200 Instructions Manual page 14

14 GETTING STARTED
EN
Power
This camera's 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
Charging the Battery Pack
Power Lock Button
Switch
Battery
Pack
Protrusion
Power/Charge Lamp
OPEN
Battery/CF Card Cover
Open the cover.
To
DC connector
AC Adapter
Power Cord
To AC outlet
1
Set the power switch to OFF while pressing down the
lock button located on the switch.
2
Slide and hold OPEN in the direction of the arrow
then open the battery/CF card cover.
3
Insert the battery pack firmly into the battery pack
mount until it locks into space as shown in the illustration.
4
Close the battery/CF card cover firmly until it locks.
5
Connect the AC adapter to the camera, then connect
the power cord to the AC adapter.
6
Plug the power cord into an AC outlet. The power/
charge lamp on the camera blinks to indicate charging
has started.
7
When the power/charge lamp goes out, charging is
finished. Unplug the power cord from the AC outlet.
Disconnect the AC adapter from the camera.
To detach the battery pack
Open the battery/CF card cover, and remove the battery
pack while sliding BATTERY in the direction of the arrow
B
.
BATTERY
Battery pack
BN-VM200U (provided)
Charging time
Approx. 1 hr. 35 min.
A
,