Binatone HM-351 Instruction Manual page 6

7. At the end of the operation set the speed selector (2) to «0»
position and switch the unit off the power supply.
8. Remove excessive products from attachments by a plastic or
wooden scapula.
9. Push the button of automatic ejection of attachments (3) to take
them out of the housing (1).
CLEANING AND CARE
1. Always disconnect the unit from the power
2. Rub the housing (1) and the power cord
3. Wash the attachments (5,6) in warm wa-
may be washed in a dishwashing machine.
Note: never immerse the appliance's housing (1) and the
power cord (10) into water.
USEFUL RECOMMENDATIONS
Speed
1 low
2 low–middle
3 middle
4 middle–high
5 high
Attachments to knead dough (6) should be used for average
texture dough. Tough dough should be kneaded manually.
Speed regimes 1 and 2 are considered to be optimal for knead-
ing dough.
You can change the mixer's speed in the course of its operation.
Turbo regime. The turbo button (4) provides an additional
possibility to increase the mixer's operation speed in the course
of several short time periods. This function can be activated at
any of 5 speed ranges. To achieve that press the button (4) and
keep it pressed. Time of continuous operation of the appliance in
the turbo regime shall not exceed 1 minute.
outlet before cleaning.
(10) of the machine with damp cloth and
then rub it dry.
ter with detergent and dry them. Attachments
It is recommended to use beating whisks (5)
to prepare puddings, puree, mobile dough
(for example, pancake dough), to beat cream
and egg whites (fof example, to prepare kiss).
Selection of the speed regime:
Function Utilization
To combine To prepare sauces, puddings,
components dough for rolls и pancakes.
To mix To mix liquid and dry
ingredients, to beat up eggs
To shake To prepare mobile dough and
mixes
To beat To mix butter with sugar, to
prepare dough for cookies, mixes
for patisserie and glace icing
To froth To prepare light foamy mixes,
to beat cream, whites, etc.
5