Troubleshooting - Radio Shack E-Chess Owner's Manual

Clearing the Board/
Placing Pieces
You can clear all pieces from the
chessboard then select and set piec-
es where you want them.
Note: The computer sounds an error
beep if it detects some illegal settings.
CEZ; CEZ;
CEZ; CEZ;
1. Press . appears.
SHIFT
2. Repeatedly press
9Bh8h 9Bh8h 9Bh8h 9Bh8h
until (clear board)
MOVE
appears. The board is cleared of
all pieces.
3. Press
SETUP +/HINT
. The chessboard
LEVEL
cleared of all pieces. Then
appears and a piece flashes.
4. Repeatedly press
NEXT MOVE
,
LAST MOVE NEXT PIECE
ˆ

Troubleshooting

If your computer is not working as it
should, follow the suggestions below
to see if you can eliminate the prob-
lem. If you cannot, take the computer
to your local RadioShack store for as-
sistance.
Problem Suggestion
The display is Check the batteries.
dim or blank,
Press the RESET hole
or the com-
to clear the display.
puter does not
work.
LAST PIECE
the square you want.
5. Repeatedly press
or
SETUP –/LEVEL
piece you want to place.
6. If necessary, repeatedly press
of the piece you want to place,
then press
confirm the piece.
OPTIONS/
7. Press
NEXT PIECE
Another piece appears.
or
SETUP –/
8. Repeat Steps 4–7 to add addi-
is
tional pieces to the board.
I[jKF I[jKF I[jKF I[jKF
9. Once you have placed all the
pieces you want, press
,
ON
, and
Problem
The computer
does not
accept a legal
move.
You cannot
resume the
current game.
Troubleshooting
to move the piece to
SETUP +/HINT
to select the
to change the color
/UNDO
OPTIONS/MOVE
,
NEXT MOVE LAST MOVE
, or
LAST PIECE.
CLEAR/
to start the game.
Suggestion
Verify your position to
make sure it is correct.
Press OPTIONS/MOVE
to interrupt the com-
puter.
Check the level and fill
the blank with the allow-
able color code.
Press SHIFT then NEW
GAME/HELP to start a
new game.
to
,
21