Special Picture Playback - JVC TH-P5 Instructions Manual

Advanced operations

Special picture playback

Frame-by-frame playback
7During playback
Press 8 repeatedly.
Each time you press the button, the still
picture advances by one frame.
To return to normal playback
Press play button for corresponding source (DVD 3 or USB
MEMORY 3).
Playing back in slow-motion
7During playback
1
Press 8 at the point
where you want to start playback
in slow-motion from.
The system pauses playback.
2
Press SLOW 9.
• Playback in forward slow-motion starts.
For DVD VIDEO only:
• To play back in reverse slow-motion, press SLOW (.
Each time you press the button, the playback speed
become faster (1/32, 1/16, 1/8, 1/4, 1/2).
To return to normal playback
Press DVD 3.
NOTE
• Sound cannot be heard during slow-motion playback.
Zooming in
7During playback or while paused
1
Press ZOOM with SHIFT
pressed.
Each time you repeat the procedure,
the scene magnification changes.
2
While zoomed in, press Cursor 3/
2/Y/5 to move zoom-in area.
To return to normal playback
Press ZOOM repeatedly with SHIFT pressed, to select OFF.
NOTE
• The number of the magnification steps varies depending on
the disc type.
• During slide-show playback of JPEG, zooming in is not
available. In such a case, press 8 to pause slide-show
playback, then zoom in.
• During playback, there may be a case where Cursor (3/2/
Y/5) does not work in step 2.
27
See page 20 for button locations.
Changing the VFP setting
The VFP (Video Fine Processor) function
enables you to adjust the picture character
according to the type of programming,
picture tone or personal preference.
7During playback
1
Press VFP.
The current VFP settings appear on the TV screen.
Example:
2
Press Cursor 3/2 repeatedly to
select the VFP mode.
• NORMAL: Normally select this.
• CINEMA: Suitable for movies.
When you select "NORMAL" or "CINEMA", press VFP
to complete the setting.
• USER 1 and USER 2: You can adjust parameters that
affect picture appearance.
Only when selecting "USER 1" or "USER 2" in step 2,
proceed to perform the following operation;
3
Press Cursor Y/5 repeatedly to
select a parameter you want to
adjust.
Adjust gradually and confirm picture appearance
results are as preferred.
• GAMMA: Controls brightness of neutral tints while
maintaining brightness of dark and bright portions
(–3 to +3).
• BRIGHTNESS: Controls screen brightness (–8 to
+8).
• CONTRAST: Controls screen contrast (–7 to +7).
• SATURATION: Controls screen color depth (–7 to
+7).
• TINT: Controls screen tint (–7 to +7).
• SHARPNESS: Controls screen sharpness (–8 to +8).
4
Press ENTER.
Example:
5
Press Cursor Y/5 to change the
setting.