S-Aspect, Information - Hitachi PJ-TX200 User Manual

Item
Using the ▲/▼ cursor buttons turns the S-ASPECT function on and
off.
When the S-ASPECT function is enabled S2-video signals can be
S-ASPECT
detected and an optimum aspect ratio automatically selected.
- NOTE -
• When the ASPECT button on the remote control is used or the
ASPECT item in the IMAGE menu (43) is used, this item is
automatically disabled.
This function is performed as soon as the ► cursor button is
pressed to select this item. It displays the INFORMATION dialog
that shows the currently selected signal input.
Example for computer (RGB) signals
Example for an HDMI signal
INFORMATION
Example for a video, s-video and component video signal
Example for a SCART RGB signal
- NOTE -
• The INFORMATION function cannot be used when there is no
signal.
TURN ON  TURN OFF
INPUT‑INFORMATION
INPUT‑INFORMATION
COMPUTER COMPUTER
1024x768 @85 1024x768 @60
FRAME LOCK
INPUT‑INFORMATION
INPUT‑INFORMATION
HDMI HDMI
1920x1080i @60 1920x1080i @60
FRAME LOCK
INPUT‑INFORMATION INPUT‑INFORMATION
VIDEO S‑VIDEO
NTSC PAL
AUTO AUTO
INPUT‑INFORMATION
COMPONENT
576i @50
SCART RGB
Advanced Menu (INPUT menu)
Description
INPUT‑INFORMATION
COMPUTER
1080i @60
INPUT‑INFORMATION
COMPONENT
1080i @60
47