Color Temp - Hitachi PJ-TX200 User Manual

Item
This projector provides 4 pre-set modes and 4 custom color
temperature modes.
To select a mode
Using the ▲/▼ cursor buttons in the COLOR TEMP menu changes
the color temperature mode. The mode that the yellow highlight bar
is on is the currently selected mode.
 6500K, 7500K, 9300K
 Hi-BRIGHT
 CUSTOM-1, CUSTOM-2, CUSTOM-3, CUSTOM-4

COLOR TEMP

To adjust a CUSTOM mode
(1) Select one of the CUSTOM modes to adjust using the ▲/▼
(2) Select the base mode to be adjusted using the ▲/▼ cursor
(Continued on next page)
6500K ↔ 7500K ↔ 9300K ↔ Hi-BRIGHT
CUSTOM-1 ↔ CUSTOM-2 ↔ CUSTOM-3 ↔ CUSTOM-4
These modes set the same color temperature as
the mode name.
The mode is prepared thinking much of the
brightness of the image with the maximum gains of
all colors.
These modes can be customized based on one of the pre-set
modes.
cursor buttons. Then press the ► cursor button to display the
CUSTOM dialog.
Note that pressing the ▲/▼/► cursor buttons or the ENTER
button in the CUSTOM dialog will erase the current settings of
the selected mode. If you want to keep the settings, please press
the ◄ cursor button to return to the preceding menu, and select
a different CUSTOM mode.
buttons. Then press the ► cursor button to display a dialog with
3 sets of 3 adjustment bars. Each set corresponds to a step of
the color temperature, and every set has 3 adjustment bars for
red, green and blue. The names of selected mode and the base
mode are shown at the bottom of the dialog.
COLOR TEMP CUSTOM‑1
6500K Select
7500K the reference
9300K
►
Hi‑BRIGHT
CUSTOM‑1 6500K
CUSTOM‑2 7500K
CUSTOM‑3 9300K
CUSTOM‑4 Hi‑BRIGHT
Advanced Menu (PICTURE menu)
Description
ENTER:
LOW MID HIGH
R G B R G B R G
►
OFFSET
HIGH
R G B
MIDDLE
+0 +0 +0 +0 +0 +0 +0 +0
LOW
CUSTOM
CUSTOM‑1 [7500K]
COLOR TEMP
6500K
7500K
9300K
Hi‑BRIGHT
CUSTOM‑1
CUSTOM‑2
CUSTOM‑3
CUSTOM‑4
B
R
+0
39