Advertisement
Connecting the Units
Connecting to separately sold power amp
This product
Rear output
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Blue/white (6*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will
differ depends on the type of vehicle.
Connect 6* and 7* when Pin 5 is an
antenna control type. In another type of
vehicle, never connect 6* and 7*.
Connect with RCA cables
Power amp (sold
(sold separately)
separately)
System remote control
+
+
Rear speaker
Rear speaker
≠
≠
Perform these connections when
using the optional amplifier.
Autogood products internet store http://130.com.ua
<ENGLISH>
When using a display connected video outputs
WARNING
Never install the display in a location where it is visible to the driver while driving.
Display with
RCA input jacks
To video input
Video output
This product
(VIDEO OUTPUT)
1.5 m
RCA cable
(supplied)
Advertisement
