The Installation Procedure; Figure 4-2: The Setup Wizard's License Agreement; Figure 4-3: The Setup Wizard's Wireless Mode Screen - Linksys WPC54G User Manual

Wireless-G Notebook Adapter

The Installation Procedure

1. To install the Adapter, click the Install button on the Welcome screen.
2. After reading the License Agreement, click the Next button if you agree, or click the Cancel button to end the
installation.
3. The Setup Wizard will ask you to choose a network mode. Click the Infrastructure Mode radio button if you
want your wireless computers to network with computers on your wired network using a wireless access
point. Click the Ad-Hoc Mode radio button if you want multiple wireless computers to network directly with
each other.
In the SSID field, enter the SSID of your wireless network. The SSID must be identical for all devices in the
network. The default setting is linksys (all lowercase). Click the Next button.
NOTE: Network SSIDs should be unique to your network and identical for all
devices within the network.
Chapter 4: Software Installation and Configuration
The Installation Procedure

Figure 4-2: The Setup Wizard's License Agreement

Figure 4-3: The Setup Wizard's Wireless Mode Screen

8