Dodge Durango 2013 User Manual page 107

WHAT TO DO IN EMERGENCIES
10. Remove the Dodge center cap using a jack tool from inside the aluminum road wheel
and snap on the protective plastic plate.
NOTE:
The plastic plate will prevent the road wheel
from being scratched when sliding it under
the vehicle.
11. Stand the wheel up against the bumper with the plastic plate facing you.
12. Slide the cable end, spring and metal
tube through the wheel and plastic
plate. Rotate the stamping on the cable
and push it through the wheel and plas-
tic plate. Snap the stamping into place.
13. Slide the road wheel on the ground using
the protective plate until it is directly
under the winch and between the rear
bumper and exhaust system heat
shields. Raise the tire by turning the lug
wrench on the winch extension clock-
wise until it clicks/skips three times to
make sure the cable is tight.
NOTE:
Double check to ensure the tire is snug
against the underbody of the vehicle. Dam-
age to the winch cable may result if the
vehicle is driven with the tire loose.
105