150 | Embedded Network Video Recorder User Guide
Section 9: Viewer Configuration Controls
Real-Time Monitoring
Left-click a channel name in Section 2, the Monitors Channel section, to select that channel for
viewing.
The video window shows statistics about the video.
www.honeywell.com/security
Table 5-2
Viewer Configuration Controls
Button
Name
Video Quality
Fluency
Full Screen
Vertical Synchronization
Single-channel Window
Four-channel Window
Figure 5-11
Live View Video Window
Description
Click to select the video quality. Select either
High quality or Low quality.
Click to configure the fluency. Select from
Fluency Level 1, Fluency Level 2, Fluency
Level 3, Middle level, Latency Level 1,
Latency Level 2, and Latency Level 3.
Click to switch the viewer to show video full
screen. Click Esc (on your PC) to quit full
screen.
Click to configure vertical synchronization.
Click to switch to single channel viewing.
Click to switch to switch to four channel
viewing.