D-Link DAP-1360 User Manual page 48

DAP-1360 Wireless N 300 Access Point & Router
User Manual
To create a MAC-IP pair, click the Add button. In the IP field, enter an IP address which will be
assigned to the device from the LAN, then in the MAC field, enter the MAC address of this device.
In the Host field, specify a network name of the device for easier identification (optional).
Also you can create a MAC-IP pair for
To do this, select the relevant value from the
and MAC fields will be filled in automatically).
When all needed MAC-IP pairs are specified, click the Save button.
Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair,
select the checkbox in the relevant line in the table and click the Remove button. Then click the
Save button.
Figure 37. The section for creating MAC-IP pairs.
a device connected to the access point's LAN at the moment.
Known IP/MAC
Page 48 of 212
Configuring Device (Access Point Mode)
addresses drop-down list (the IP