Virtual Server Settings Wizard - D-Link DAP-1360 User Manual

DAP-1360 Wireless N 300 Access Point & Router
User Manual

Virtual Server Settings Wizard

To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Virtual server settings wizard link in the Firewall section.
On the opened page, you can specify the following parameters:
Parameter
Template
Name
Interface
Private IP
Remote IP
When needed settings are configured, click the Save button. After that you get to the quick settings
page.
Figure 96. The page for adding a virtual server.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
Enter a name for the virtual server for easier identification. You can
specify any name.
Select a WAN connection to which this virtual server will be
assigned.
Enter the IP address of the server from the local area network. To
choose a device connected to the access point's LAN at the moment,
select the relevant value from the drop-down list (the field will be
filled in automatically).
Enter the IP address of the server from the external network.
Page 123 of 212
Configuring Device (Router Mode)
Description