Drying Inside; Automatic Operation; Manual Operation - Mitsubishi MJ-E16VX-S1 Service Manual

Table of Contents

Advertisement

¡ Drying inside
The inside of the unit can be dried to suppress mildew growth on the cooler.
On days the dehumidifier is used, drying inside is recommended.

Automatic operation

To activate drying inside after every use.
¡Drying inside standby
(Drying inside lamp lit)
Drying inside starts when operation ends
When the unit is turned off, LAUNDRY mode
ends, or the OFF timer ends.
¡Drying inside starts
The Drying inside lamp flashes, the
humidity indicator turns off, and the louvre
stops in the vertical position.
Drying inside mode
¡Drying inside ends
The Drying inside lamp turns off and the
louvres shut.
<To deactivate automatic operation>
Press the Drying inside button while the unit is
on (the Drying inside lamp turns off)
∞ Connecting/disconnecting the power plug deactivates automatic operation.
∞ This function does not remove existing mildew. Also, aborting drying inside may cause the benefits to
diminish.
∞ Do not close the louvres while drying inside as this causes noise.
∞ The moisture expelled from inside the unit may cause the humidity level of the room to rise.
∞ The air leaving the unit may appear white depending on the humidity or temperature of the room.
∞ The moisture expelled from inside the unit may smell due to odorants* that were not caught by the
filter dissolving in the water.
* The photocatalytic filter is mainly for absorbing ammonia.
∞ The OFF timer cannot be set during drying inside.
<Drying inside operation>
OFF
Regular
operation
Dehumidifier
Air purifier
8
Press
while the unit is on
This operation takes approximately one hour. However, when the
room temperature is below 1°C, drying time is shortened to protect
the compressor.
Drying inside operation (approx. one hour.)
Airflow stops; compres-
Airflow
sor activates (operating
sound)
Approx.
Compressor operates
30min.
according to room temperature

Manual operation

To activate drying inside by pressing a button.
Press
¡Drying inside starts
The drying inside lamp flashes, the
humidity indicator turns off, and the louvre
stops in the vertical position.
Drying inside mode
¡Drying inside ends
The drying inside lamp turns off and the
louvres shut.
To abort drying inside
Press the drying inside button while the
unit is performing drying inside (the Drying
inside lamp turns off)
Press the power button to abort drying inside,
and resume normal operation.
Operating
Compressor
sounds
stops
Approx. 20min.
while the unit is off
Unit
stops
Airflow
auto-
mati-
Approx.
cally
10min.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents