DRAINING, FILLING AND BLEEDING THE ENGINE COOLING CIRCUIT
B1G200TD
Engine : 8HT
[1] Filling cylinder
[2] Adaptor for filling cylinder
[3] Control rod for filling cylinder
Draining
Disconnect the negative terminal of the battery.
Remove the header tank cap with care.
Place a draining tray under the cooling radiator.
Drain the radiator by uncoupling the bottom hose.
Place a draining tray under the engine.
Drain the engine by removing the plug (1). (accessible from above the engine) .
Refit the drain plug (1). (with a new O-ring seal and clip) .
91
Tools.
: 4520-T
: 4222-T
: 4370-T