Draining, Filling And Bleeding The - CITROEN C1 User Manual

DRAINING, FILLING AND BLEEDING THE ENGINE COOLING CIRCUIT
Engine : CFA
Press the radiator inlet and outlet hoses several times to test the level of coolant in the radiator. If
the level goes down, add more coolant fluid.
Screw the radiator cap "a" back on securely.
Slowly pour engine coolant into the expansion chamber up to the maximum mark.
Warm up the engine, until the cooling fan triggers.
Adjust the air conditioning as indicated during the rise in engine temperature.
Manual air conditioning system
Adjust the controls as indicated
Speed of cooling fan : all adjustments except temperature in position "OFF" : button turned
towards hot air, air conditioning control in position "OFF"
Maintain the engine speed between 2000 and 2500 rpm until the cooling fan triggers.
Press several times on the radiator inlet and outlet hoses several times during the rise in engine
temperature.
Stop the engine and wait for the coolant temperature to come down.
If the coolant level is below the maximum mark, repeat the 10 previous stages until the coolant
level is up to add more coolant fluid.
Again check the level of engine coolant in the expansion chamber. If it is below the maximum
mark, add more coolant fluid.
Fill the radiator with coolant fluid and fix on it a radiator cap tester.
Pump to obtain a pressure of 1.37 bar and check that there is no leak.
B1G200ND
90