Honda VTX1300C VTX 2004 Owner's Manual page 165

If You Have a Flat Tire
3. Tighten the axle pinch bolts on the left
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4. Tighten the axle bolt to the specified
torque:
43 lbf·ft (59 N·m , 6.0 kgf·m)
5. Install the brake caliper assembly onto
the fork leg.
To avoid damaging the brake pads
while installing the brake caliper
assembly, carefully fit the brake disc
between the pads.
6. Install the caliper fixing bolts and
tighten to the specified torque:
22 lbf·ft (30 N·m , 3.1 kgf·m)
7. Operate the front brake and pump the
fork several times. Check for free
wheel rotation after the brake is
released. Recheck the wheel if the brake
drags or the wheel does not rotate freely.
156
Taking Care of the Unexpected
8. Tighten the axle pinch bolts on the right
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.