Sheet - JVC RX-8010VBK Service Manual

Cassette deck or MD recorder
Cassette deck
To audio input
RIGHT
To audio input
MD recorder
Note:
You can connect either a cassette deck or an MD recorder to the
TAPE/MD jacks. When connecting an MD recorder to the TAPE/MD
jacks, change the source name, which will be shown on the display
when selected as the source, to "MD." See page 16 for details.
CD recorder
CD recorder
To audio input
RIGHT
If your audio components have a COMPU LINK or TEXT
COMPU LINK jack
• See also page 41 for detailed information about the connection and
the COMPU LINK remote control system.
• See also page 42 for detailed information about the connection and
the TEXT COMPU LINK remote control system.
To audio output
AUDIO
LEFT
REAR
PHONO
CD
OUT
(REC)
TAPE
MD
IN
(PLAY)
To audio output
To audio output
AUDIO
LEFT
REAR
PHONO
CD
OUT
(REC)
TAPE
MD
IN
(PLAY)
OUT
(REC)
CDR
IN
(PLAY)
Video component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
• If your video components have S-video (Y/C-separation) and/or
component video (Y, P C , P
B/ B
an S-video cable (not supplied) and/or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order — Component video > S-video > Composite
video.
IMPORTANT:
This receiver is equipped with the following video terminals —
composite video, S-video and component video terminals. You can
use any of the three to connect a video component.
However, remember that the video signals from one type of these
input terminals are output only through the video output
terminals of the same type.
Therefore, if a recording video component and a playing video
component are connected to the receiver through the different video
terminals, you cannot record the picture from the playing component
on the recording component. In addition, if the TV and a playing video
component are connected to the receiver through the different video
terminals, you cannot view the playback picture from the playing
component on the TV.
VCR(s)
S-VHS (or VHS) VCR
A
B
AUDIO
RIGHT LEFT
FRONT
TV SOUND
(REC)
VCR1
(PLAY)
VCR2
(PLAY)
MONITOR
A
B
S-VHS (or VHS) VCR
Å To left/right channel audio output
ı To left/right channel audio input
Ç To S-video output
Î To composite video output
‰ To composite video input
Ï To S-video input
C ) terminals, connect them using
R/ R
C D
E F
VIDEO
VIDEO S-VIDEO
DVD
DBS
OUT
IN
OUT
(REC)
IN
OUT
C D
E
F
6