Kia Automobile User Manual page 122

Knowing your vehicle
6. AUTO SEEK Select Button
(Automatic Channel Selection)
Press the AUTO SEEK select button.
1
When the side is pressed, the
unit will automatically tune to the
2
next higher frequency and when the
side is pressed, it will automati-
cally tune to the next lower frequen-
3
cy.
CLASSIC➟POPS➟ROCK➟JAZZ➟OFF
4
5
7. TUNE Select/Audio Control
Knob
6
Rotate the knob
increase the frequency and turn the
knob counterclockwise to reduce the
7
frequency.
8
8. PRESET STATION Select
Buttons
9
Six stations for AM, FM1 and FM2
respectively can be preset in the
electronic memory circuit.
3 112
HOW TO PRESET STATIONS
Six AM and twelve FM stations may
be programmed into the memory of
the radio. Then, by simply pressing
the AM/FM band select button and/or
one of the six station select buttons,
you may recall any of these stations
instantly. To program the stations, fol-
low these steps:
• Press AM/FM selector to set the
band for AM, FM1 and FM2.
• Select the desired station to be
stored by seek or manual tuning.
• Determine the preset station select
button you wish to use to access
clockwise to
that station.
• Press and hold the station select
button for more than 0.8 seconds. A
select button indicator will show in
the display indicating which select
button you have depressed. The fre-
quency display will flash after it has
been stored in to the memory. You
should then release the button, and
proceed to program the next
desired station. A total of 18 stations
can be programmed by selecting
one AM and two FM stations per
button.
• When completed, any preset sta-
tion may be recalled by selecting
AM, FM1 or FM2 band and the
appropriate station button.
CAUTION
• Do not place beverages close
to the audio system. The play-
back mechanism may be dam-
aged if you spill them.
• Do not strike or allow anything
to impact the audio system,
damage to the system mecha-
nisms could occur.