Monogram ZGU385L Installation Instructions Manual page 13

36" stainless steel gas cooktops
Hide thumbs Also See for ZGU385L:
Table of Contents

Advertisement

Available languages

Available languages

COOKTOP INSTALLATION OVER A
MONOGRAM WARMING DRAWER,
MODEL ZTD910 OR ZKD910
These cooktops may be installed over a 30"
or 27" Warming Drawer. Both the cooktop and
the warming drawer must be installed according to
each specific installation instruction. For accurate
planning, review the Warming Drawer Installation
Instructions in advance; order Pub. No. 49-8937.
Install 2x4 or 2x2 anti-tip block against
rear cabinet wall 9" from cutout floor
to bottom of block
23-1/2" min.
Use a 36" or wider base cabinet.
• Plan gas supply location carefully to avoid
interference with the warming drawer.
Installation Options
Cooktop 33-7/8"
9"
POWER SUPPLY:
If local codes permit, the cooktop and warming
drawer may operate from the same 120V duplex
outlet. Refer to installation instructions for details.
1-1/2" cabinet top
25"
2-1/2" min.
19-1/8"
5-1/2" min.
9-1/4"
A
NOTE: When installing a Monogram Warming Drawer
below a cooktop, a solid barrier must be installed at least
1" from the lowest point of the bottom of cooktop
burner box to the top of cutout. See Warming Drawer
Installation Instructions for details.
13
36"
countertop
height
Dim. A
ZTD910
28-1/2"
ZKD910
25-1/2"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zgu385n

Table of Contents