Porcelain Panel Installation; Section 11: Panel Installation - Montigo 30FID Traditional Installation & Maintenance Manual

Porcelain Panel Installation

The 30FIDV-LGS must only be used with the Firebox Panels
installed. With the Fireplace Door removed, the panels can be
easily installed.
1). Make sure all the Porcelain Panels and fasteners are received
in good order.
Figure 20.
Figure 20a.
2). The back of the porcelain panels have insulation. Make sure
insulation is in good order. Without insulation you may experience
pilot stability issues.
Figure 20b.
XG00516-060614
Installation
3). The porcelain panel kit comes with replacement panel retainers.
Use if necessary. See figure for panel retainer location.
Figure 20c.
5). Carefully slide the right panel along the right side of the firebox
leaving enough room to slide the rear panel behind it. Take care
to not scratch the firebox paint.
Figure 20d.
I-Series Indoor Gas Fireplace
Page 29