General Product Care; Troubleshooting Guide - GE 21887 User Manual

General Product Care

Simply wipe the base station with a damp cloth or an antistatic wipe.
Never use a dry cloth as this can cause static discharge.

Troubleshooting Guide

When you forgot the base PIN code, follow the following procedures
can RESET the PIN code to "0000".
1. with the base is in standby mode, press MENU/OK key and key in
"442737"
2. Press ▲ or ▼key, "FACTORY RESET" is shown.
3. Press MEN/OK key, "RESET" is shown
4. Press MENU/OK to confirm.
5. Press the exit key on base to quit.
6. Following "Registration" section to register all handsets again.
PROBLEMS
Registration not work. The battery is not
No display.
CAUSES
sufficiently charged.
Handset and base
station were not
prepared for
registration.
Wrong PIN code is
entered
The battery has not
been charged.
– 39 –
SOLUTIONS
Charge the battery for
14 hours (see Battery
Charging).
Unplug and then plug
in the power adaptor.
Enter correct PIN
code again.
(default is 0000)
Charge the battery or
replace them (see
Battery Charging)