Table of Contents
Advertisement
The following indication is displayed when the
REPEAT REC function is turned on.
4:
• Sufficient capacity to use the REPEAT REC
function is available.
• The maximum number of clips that can be
recorded in succession by the REPEAT REC
function is four.
Example: When a 16 GB SD Memory Card is
formatted with the portable recorder,
4 is displayed.
8:
• Sufficient capacity to use the REPEAT REC
function is available.
• The maximum number of clips that can be
recorded in succession by the REPEAT REC
function is eight.
Example: When a 32 GB SD Memory Card is
formatted with the portable recorder,
8 is displayed.
LACK:
• Available capacity is insufficient. REPEAT
REC operation cannot start.
• "LACK" is also displayed when
[CARD&BATTERY] is set to [OFF] on the
[DISPLAY SETUP] setup menu.
• Depending on the state of the SD Memory Card,
"LACK" may be displayed immediately after an
SD Memory Card is formatted with the portable
recorder because sufficient capacity is not
available.
4 Digital zoom ratio display (In CAM mode)
Displays the digital zoom ratio. (Page 85)
D2X: 2 x zoom
D5X: 5 x zoom
D10X: 10 x zoom
5 Recording format display (Page 86)
Displays the format that was set when the clip
was recorded.
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
6 System frequency display (Page 94)
60 : 59.94 Hz
50 : 50 Hz
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
7 Information display
Displays the following information.
• Performance of the auto white balance or the
auto black balance (In CAM mode: Page 43)
• Warning (Page 77)
• AWB error message (AWB NG)
(In CAM mode)
8 Focus assist display (In CAM mode)
Displayed when focus assist is used.
(Page 44)
• There is no output to external devices.
9 Microphone level automatic control display
Displayed when [MIC ALC] → [ON] is set in the
[RECORDING SETUP] setup menu.
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
10 Time stamp display (Page 45)
11 Date and time display
Month:
JAN (January), FEB (February), MAR (March),
APR (April), MAY (May), JUN (June), JUL
(July), AUG (August), SEP (September), OCT
(October), NOV (November), DEC (December)
mmm dd yyyy hh:mm:ss
12 Frame rate display
Displays the recording frame rate.
Not displayed when set to 1080/60i (or 1080/50i).
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
13 Shutter speed display (In CAM mode)
Displays the shutter speed.
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
(Continued on the next page)
Day of the month
Year: 2001 - 2039
Hours
Minutes
Seconds
73
Advertisement
Table of Contents
