Advertisement
Quick Links
Download this manual
See also:
Manual
Full HD 3MOS Camera & Recording system
POVCAM
（AG-MDC10, AG-MDR15）
Quick Reference Guide
Recording with AG-MDC10 Camera
Advertisement
Related Manuals for Panasonic GP-KH232
Summary of Contents for Panasonic GP-KH232
- Page 1 Full HD 3MOS Camera & Recording system POVCAM （AG-MDC10, AG-MDR15） Quick Reference Guide Recording with AG-MDC10 Camera...
- Page 2 Connecting Camera to the Recorder Insert the SD Memory Card into the card slot and close the door. Note : POVCAM supports up to 32GB SDHC card. Preparation #2 Note : Watch the angle of connector which has a key slot. Connect the AG-MDC10 Camera with AG-C20003 (3m) or AG-C20020 (20m) Cable.
- Page 3 Connecting monitor via HDMI cable or HD-SDI output HDMI connection (HDMI cable) Monitor HD-SDI connection (BNC cable) Note : Menu setting must be as follows ; When using HDMI connection, MENU > AV OUT SETUP > SDI OUT > OFF When using HD-SDI connection, MENU >...
- Page 4 Formatting SD memory card Note : All data in SD memory card will be erased by FORMAT process. 1) Press MENU button , and select “CARD FUNCTION” by using UP/DOWN button 2) Press ENTER button , select “CARD FORMAT” and press ENTER button again.
- Page 5 Quick Reference for Menu setup For menu setup, press MENU button and select item by using up/down button , then press ENTER button In order to simplify the preparation, only follow below instructions for recording. The other selections doesn’t have to be changed. OTHER FUNCTIONS --- MENU INIT NO-->YES, then POWER OFF-->ON Returning to factory initial set CAMERA SETUP --- MATRIX...
- Page 6 Adjusting Focus & Iris, Setting the shutter and White balance 1) Press ENTER button to indicate “F” at bottom of screen Press button to adjust focus. 2) Press ENTER button to indicate “I” at bottom of screen Press button to adjust Iris. 3) Press ENTER button to indicate “S”...
- Page 7 How to set White balance under the OR lighting condition Surgical Light In order to reproduce the white accurately, white balance should be adjusted properly under the actual lighting condition. White paper 1) During shooting white pattern such as white paper under the actual lighting condition in OR, press SHIFT/EXEC button and UP button simultaneously, and keep pushing...
-
Page 8: How To Start Recording
How to start Recording Press the REC/PAUSE button to start recording. Press the REC/PAUSE button once again to finish recording. During recording, REC indicator (Yellow LED) is ON, also “REC” on the display. - Page 9 Playing back previously recorded video 1) Press the MODE button to change to playback mode. Thumbnails displayed on the screen. 2) Choose the clip by using button, and press ENTER button to start playback that clip. 3) During playback, buttons works as below ; PAUSE / PAUSE Release REWIN...