Aiwa ADC-M65 YZ Operating Instructions Manual page 14

PRECAUTIONS
• Use only in a 12-volt DC negative-ground electrical
system.
• Disconnect the vehicle's negative battery terminal
while mounting and connecting the unit.
• When replacing the fuse, be sure to use one with an
identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the
unit.
• Keep screwdrivers, etc. and other metallic or magnetic
objects away from the playback head.
• When your vehicle has been parked in direct sunlight
resulting in a considerable rise in the temperature
inside, allow the unit to cool off before operating it.
• Keep the volume at a level at which you can hear
outside warning sounds (horns, sirens, etc.).
NOTE
AIWA CO. LTD. - JAPAN - DECLARES UNDER ITS
OWN RESPONSIBILITY THAT THE PRODUCT
DESCRIBED IN THIS MANUAL IS IN COMPLIANCE
WITH THE DIRECTIVES OF D.M. 28.8.95 No. 548,
ACCORDING TO THE STIPULATIONS OF
PARAGRAPH 3 OF ATTACHMENT A OF D.M. 25.6.85
AND PARAGRAPH 3 OF ATTACHMENT 1 OF D.M.
27.8.87 (REGULATIONS
FREQUENCIES).
The above information is only for Italy.
CAUTION
Modifications or adjustments to this product, which are
not expressly approved by the manufacturer, may void
the user's right or authority to operate this product.
1 1
ENGLISH ENGLISH
TABLE OF CONTENTS
THEFT PROTECTION .............................................. 2
BASIC OPERATION, AUDIO AND CLOCK
RADIO OPERATION ................................................. 3
TAPE PLAYBACK ..................................................... 6
AUXILIARY EQUIPMENT ......................................... 7
OTHER FUNCTIONS ............................................... 7
CD CHANGER OPERATION (CT-R431M only) ....... 8
TROUBLESHOOTING .............................................. 9
MAINTENANCE ........................................................ 9
SPECIFICATIONS .................................................. 10
Notes
• These operating instructions cover the CT-R431M,
CT-R421, and CT-R411.
• The figures in these operating instructions show the
CT-R431M.
• Some buttons are assigned two or more functions.
For detailed descriptions, refer to the related pages.
CD changer
(optional) control
function
REGARDING
Notes on cassettes
Do NOT expose cassettes to direct sunlight, extremely
high or cold temperature or moisture.
Keep cassettes away from equipment with built-in
magnets to avoid unwanted noise or loss of sound
quality.
Do NOT touch the tape of a cassette, as any dirt or dust
will contaminate the heads.
Be sure to remove any cassette from the unit if you are
not using it.
DEMO (Demonstration) mode
The unit has an extra display mode, which demonstrates
the display of the operation modes of the unit. The unit
switches to DEMO mode automatically if you turn the
unit on and leave it as it is for 5 seconds after all the
connections have been completed.
To cancel DEMO mode
During DEMO mode, press and hold DISP for more than
2 seconds.
To resume DEMO mode, press and hold DISP again for
more than 2 seconds.
Caution on the transit protection pad
Be sure to remove the pad before operating the unit.
Transit protection pad
ADJUSTMENT ..................................................... 2
CT-R431M CT-R421,
CT-R411
yes no