Activating/Deactivating Bluetooth Link - BMW M6 Owner's Manual

ferred from your mobile phone to your vehi-
cle are also deleted in the process.

Activating/deactivating Bluetooth link

Bluetooth technology is not approved in
all countries. Observe the applicable local
regulations. Temporarily disconnect the Blue-
tooth link between the vehicle and the mobile
phone if necessary.<
If the Bluetooth link is deactivated, you cannot
operate your mobile phone via the vehicle and
the mobile phone can use other devices with a
Bluetooth interface, e.g. a laptop computer.
To temporarily deactivate the Bluetooth link
between your vehicle and your mobile phone:
1. Remove the mobile phone from the snap-in
adapter and switch it off.
2. Press the button to open the start
menu.
3. Select the menu and press the controller.
4. Select "Settings" and press the controller.
5. Select "Bluetooth" and press the controller.
6. Change to upper field if necessary. Turn the
controller until "Bluetooth" is selected and
press the controller.
7. Select "Settings" and press the controller.
the Bluetooth link is activated.
172
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
8. Select "Bluetooth communication active"
and press the controller to activate or deac-
tivate the link.
Adjusting volume
Turn the knob during a call to select the desired
volume.
This volume for the hands-free system is main-
tained, even if the other audio sources are set to
minimum volume.
You can also adjust the volume with the buttons
on the steering wheel, refer to page 11.
The setting is stored for the remote control cur-
rently in use.
Operation via iDrive
You can operate the following functions via
iDrive:
> Dial phone numbers.
> Dial phone numbers from the phone book.
> Dial stored phone numbers, e.g. from the
list of accepted calls.
> End a call.
When the ignition and radio readiness are
switched off, e.g. after removing the remote
control from the ignition lock, you can continue