Av Mode Selection; Opc (Optical Picture Control) Setting; Av Mode; Opc - Sharp Aquos LC-32PX5X Operation Manual

Basic adjustment settings

AV mode selection

AV mode gives you six viewing options to choose from to
best match the system environment, which can vary due to
factors like room-brightness, type of programme watched
or the type of image input from external equipment.
Using AV MODE on the remote control unit
Press AV MODE.
1
• Present AV mode displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
AV input mode
AV Mode: STANDARD
AV Mode: DYNAMIC (FIXED)
AV Mode: DYNAMIC
PC input mode
AV Mode: STANDARD
Using AV Mode on the menu screen
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "AV Mode", and then
3
press ENTER.
Press a / b to select the desired item, and
4
then press ENTER.
Selected item
STANDARD For a highly defi ned image in a normally
bright room
MOVIE For a movie
GAME Lowers image brightness for easier viewing.
Allows the user to customise settings as
USER
desired. You can set the mode for each
input source.
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing
Changes the image and sound settings to
DYNAMIC
the factory preset values. No adjustments
(FIXED)
are allowed.
22
AV Mode: MOVIE
AV Mode: GAME
AV Mode: USER (TV)
AV Mode: USER (PC)
Description
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only "STANDARD" and "USER" can
be selected under the AV mode selection.
OPC (Optical Picture Control)
setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
Using OPC on the remote control unit
Press OPC to switch the OPC function on and off.
Using OPC on the menu screen
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "OPC", and then press
3
ENTER.
Press a / b to select the desired item, and
4
then press ENTER.
Selected item
Off The brightness is fi xed at the value set in
"Backlight" (See page 23).
On Automatically adjusts
On (Display) Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
Description