Technical Data - Jonsered GT2128 Operator's Manual

Technical data

Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW
Catalytic converter muffler
Speed- -regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Noise levels
(see note 2)
Equivalent noise pressure level at the operators' ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A)
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916
FRONT HANDLE
2
Idling, m/s
2
Racing, m/s
REAR HANDLE
2
Idling, m/s
2
Racing, m/s
Note 1: Noise emissions in the environment measured as sound power (L
with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for
sound pressure levels under various working conditions with the following time distribution:
1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator's ear and vibrations on the handles are mea-
sured with all the approved cutting attachments for the machine. The table indicates the
lowest and highest values.
Model GT 2128 (3/8 RH arbor shaft thread)
Approved accessories Type
Trimmer head T25
545186860 Rev. 2 4/30/09
TECHNICAL DATA
dB(A)
WA
Cutting attachment guard, part. no.
537 33 83- -03
GT 2128
28
35
28,7
2800- -3200
10000
8000
0,8
Yes
Yes
Walbro/CD
Champion RCJ- -8Y
0,6
Zama
0,4
4,4
109
114
100
3,9
5,6
2,9
8,5
) in conformity
WA
English--- 18