Power Your Docking System; Replacing The Remote Control Battery - Gigaware HD Radio User Manual

Power Your Docking System

• Install one 9V battery (not included) in
the battery compartment at the bottom
of your docking system, matching polarity
symbols (+ and –) marked inside. It
provides backup power for retaining clock
setting.
• Connect the power cord to a standard power outlet.

Replacing the Remote Control Battery

Remove the insulating plastic before using the
remote control.
Press the tab on the battery compartment
tray and slide the tray out. Insert a new
battery of the same type (3V, CR2032),
positive (+) side up. Slide the tray back into the
battery compartment until it clicks.
Battery Notes Battery Notes
• Use only fresh batteries of the required size and
recommended type.
• Dispose of old batteries promptly and properly. Do not burn or bury
batteries.
• Keep button-cell batteries away from children. Swallowing a button-cell
battery can be fatal.
• If you do not plan to use your docking system for a long period, remove
the batteries. Batteries can leak chemicals that can destroy electronic
parts.
Battery
7
Setup
Press Tab
Slide Out