Listening To An External Audio Source - Gigaware HD Radio User Manual

Functions
HD Radio multicast channels (FM only)
In addition to digital quality sound, some HD Radio broadcasters offer
multiple programs simultaneously using multicast channels on their existing
frequency.
If the station offers multicast programming, "-1" appears next to the station
frequency. Use the tuner buttons to select multicast channels. Tuning up
the frequency band will take you to that radio station's next subchannel,
which will have a "-2" after its frequency.
To store preset radio stations
You can store up to 10 preset AM stations and up to 20 preset FM
stations.
1. Press PROGRAM on the docking system or PROG on the remote
control. "MEMORY" displays and the memory location digits flash.
2. Press PRESET on the docking system or press
control to select a location (01 to 20) to store the station.
3. Press PROGRAM on the docking system or PROG on the remote
control again to confirm your choice. again to confirm your choice.
4. Repeat steps 1-3 to store other stations.
Note: When tuning FM stations, pressing
200 KHz. When tuning AM stations, pressing
of 10 KHz.
To listen to preset radio stations
In AM or FM mode, press PRESET or press
control to select the desired station. to select the desired station.

Listening to an External Audio Source

1
1. Use a / " (3.5 mm) audio patch cord (not supplied) to connect the
8
audio source's earphone jack to the AUX IN jack on your docking
system.
2. Turn on your docking system and press FUNC./WAKE TO on the
docking system or FUNC on the remote control to select AUX mode.
3. Turn on the audio source to start listening.
)
or
or
) (
or
(not supplied) to connect the
10
(
or on the remote
steps at the rate of
steps at the rate
on the remote
to connect the
your docking