NEC DT710 Quick User Manual page 2

CALL WAITING/CONCURRENT CALLS
Note that the call waiting feature and maximum
number of concurrent calls you can receive is
determined by your system administrator.
If you have call waiting on your phone line, you will
hear a tone in your handset and the call indicator
lamp flashes when another call on the line is waiting
for consultation.
To answer the other incoming call (Call Waiting):
1. Press the Answer key.
2. When you have completed the call, press the
hook switch to end the call and return to your
original call.
3. Press the Hold key to resume the original call.
To place a second call (Concurrent call):
If it is enabled by your system administrator, you can
place a new call while you are on another call. They
will be treated like two separate phone calls and you
cannot switch between phone calls.
1. Press the Recall key to get dial tone.
2. Enter the phone number you want to call.
3. Wait a few seconds for the call to be
automatically dialed.
4. When you have completed the call, press the
hook switch to end the call and return to your
original call.
5. Press the Hold key to resume the original call.
Issue : May 2010
TRANSFERRING CALLS
To transfer a call
1. While on a call press the Transfer key.
2. Use the key pad to dial the telephone number to
which the held call is to be transferred.
3. Press the Transfer key if you wish to complete
the transfer without talking with the dialed party.
or
Wait a few seconds for the call to be
automatically dialed.
4. If you want all three parties to speak together,
then a 3‐way call can be established by pressing
the Conf key.
5. You can complete the transfer by pressing the
Transfer key.
CONFERENCE CALLS
To conference a call
1. While on a call, press the Conf key.
2. Use the key pad to dial the telephone number of
the party to be joined in the conference.
3. Wait a few seconds for the call to be
automatically dialed.
4. If, instead, you want to transfer the held party,
select the Transfer key.
5. You can complete the conference by pressing the
Conf key.
DT710 (ITL‐2E) Quick User Guide
SPEED DIAL KEY
To originate a call from a Speed Dial Key
1. Press the desired Speed Dial Key,
or
2. Lift the handset and press the desired Speed Dial
Key,
or
3. Press the Speaker key and press the desired
Speed Dial Key.
FUNCTION KEY
The Speed Dial Key can be pre‐programmed with a
dedicated function or a (colleague's) internal
telephone number of which the status can be
monitored by means of the LEDs.
Ask your system administrator for more details.
Function
Pressing this key activates the function:
‐ the LED is switched ON.
Pressing the key once more de‐activates the function:
‐ the LED is switched OFF.
Telephone Number
When the LED is :
‐ OFF : the telephone is idle
‐ Flashing : the telephone is ringing
you can answer this call
‐ ON : the telephone is busy
2