JVC KW-XC888 Service Manual page 30

3.3.5 Removing the pinch arm (F) assembly
(See Fig.11 and 12)
(1) Remove the polywasher and pull out the pinch arm (F) as-
sembly.
(2) Remove the compulsion spring.
3.3.6 Removing the pinch arm (R) assembly
(See Fig.11 and 12)
(1) Remove the polywasher and pull out the pinch arm (R) as-
sembly.
3.3.7 Removing the slide chassis assembly
(See Fig.13 and 14)
REFERENCE:
It is not necessary to remove the head and the tape guide.
(1) Move the slide chassis assembly in the direction of the ar-
row to release the two joints l and remove from the main
chassis.
(2) Remove the rack link.
CAUTION:
When reassembling, first reattach the rack link, and next
fit the boss m and hook n of the slide chassis assembly
to the hole of the main chassis, and engage the two joints
l.
Polywasher
Pinch arm
(R) assembly
Polywasher
Compulsion
spring
1-30 (No.MA081)
Pinch arm
Polywasher
(F) assembly
Fig.11
Pinch arm (F) assembly
Pinch arm
(R) assembly
Polywasher
Fig.12
Joint l
Slide chassis assembly
Fig.13
Boss m
Rack link
Fig.14
Joint l
Head
Tape guide
Hook n