Honda CRF100F Owner's Manual page 112

3. Align the chain adjuster index marks ( )
with the graduated scales ( ) on both sides
of the swingarm.
4. Torque the rear axle nut to:
46 lbf·ft (62 N·m , 6.3 kgf·m)
If a torque wrench is not used for this
installation, see your Honda dealer as soon
as possible to verify proper assembly.
5. Recheck drive chain slack.
6. Check rear brake pedal freeplay and adjust
as necessary (page
when repositioning the rear wheel to adjust
drive chain slack.
3
4
85 ). Freeplay is affected
Lubrication
Lubricate every 300 miles (500 km) or sooner
if chain appears dry.
Turn the rear wheel by hand. Saturate each
chain link joint so that the lubricant penetrates
between the link plates, pins, bushings, and
rollers.
Drive Chain
Servicing Your Honda
103