Table of Contents
Advertisement
7. Replace the battery and battery cover. For more
information, see "Installing and Charging the Battery" on
page 16.
Note:
Be sure to use only recommended memory cards (up to 1GB).
Using non-recommended memory cards could cause data loss or
damage your phone.
Note:
Make sure your battery is fully charged before using the MicroSD
memory card. Your data may become damaged or unusable if the battery
runs out while reading or writing to the card.
Removing the MicroSD Memory Card
To remove the MicroSD memory card from your phone:
1. Turn the phone off.
2. Open the battery cover on the back of the phone by sliding it
upward.
3. Remove the battery by lifting the bottom and sliding it
downward.
4. Lift the metal cover plate off of the MicroSD card.
5. Remove the MicroSD memory card from the recessed
compartment.
6. Lower the metal cover plate.
7. Replace the battery and battery cover. For more
information, see "Installing and Charging the Battery" on
page 16.
14 Your Phone
Advertisement
Table of Contents
