Picture - JVC DD-8 Instructions Manual

Changing the initial settings with the preference screen (continued)

PICTURE

Items
Contents (
MONITOR Select the display method suitable for
TYPE your TV.
4 : 3 PS (Pan Scan) :
For a TV with conventional 4:3 aspect
ratio. When a wide screen picture is
input, the left and right edges of the pic-
ture are not shown on the screen. (If the
disc/file is not compatible with Pan Scan,
the picture is displayed at the Letterbox
ratio.)
4 : 3 LB (Letterbox)
For a TV with conventional 4:3 aspect
ratio. When a wide screen picture is
input, black bars appear on the top and
bottom of the screen.
16 : 9 :
For an ordinary wide TV.
PICTURE Select the item suitable to the video
SOURCE source.
AUTO
:
The video source type (a video or film) is
automatically selected.
FILM :
To view a film or video recorded with the
progressive scan method.
VIDEO (ACTIVE) :
Suitable for playing back a video with a
lot of action.
VIDEO (NORMAL) :
Suitable for playing back a video without
a lot of action.
41
: initial setting)
:
Items
Contents (
SCREEN
You can turn
SAVER
saver. The screen saver activates when
there is no operation made for approxi-
mately 5 minutes since a still picture was
last displayed.
NOTE
• This function does not work when this
system outputs the video signal via the
[HDMI] terminal.
FILE TYPE When files of different types are recorded
on a disc or connected USB mass stor-
age class device, select the file type
before playback.
AUDIO
:
For MP3/WMA/WAV files.
STILL PICTURE :
For JPEG files.
VIDEO :
For ASF/DivX/MPEG1/MPEG2 files.
HDMI DVI You can select the settings for the picture
COLOR appearance (image quality, color intensity
and black fading) on the TV connected to
the [HDMI] terminal.
STANDARD :
For normal usage.
ENHANCE
:
The main unit automatically adjusts the
picture appearance.
HDMI OUT You can select the video signal type out-
put from the [HDMI] terminal.
AUTO :
For normal usage. The main unit auto-
matically selects the output video signal
type according to the TV connected to
the [HDMI] terminal.
RGB :
Select this item if no picture appears on
the TV with the "AUTO" setting. The out-
put video signal type is set to the RGB
signal.
: initial setting)
ON or OFF the screen