Radio Shack 43-3580 Owner's Manual page 41

TALK/FLASH
2. Press
displayed phone number dials
automatically.
From Talk mode
TALK/FLASH
1. Press
2. View the Caller ID message you want
to dial (see "Viewing the Caller ID List"
on page 39).
DIAL
3. Press the
phone number will be dialed.
Long Distance calls and Area Code
Setting/Cancellation
While the present Caller ID information is
displayed, pressing
remove the prefix "1" in the display to set the
call for a long distance call, or pressing
set or cancel an area code (see "Setting the
Area Code" on page 23). Ô
Storing Caller ID messages in the
Phonebook
Messages shown in the Caller ID list can be
stored in the phonebook. The phone
number and name of the party on the Caller
ID list can be stored in memory. Ô
1. When the phone is in standby mode,
view the Caller ID message to be stored.
Then press the
Edit Name
2. To complete the setting, follow the
steps 3-8 in "Storing Phone Numbers,
Names, Distinctive Rings, and Speed
Dial" on page 31-32.
SPEAKER
or
SPEAKER
or
soft key. The displayed
will place or
/tone/<
STORE
soft key.
appears.
. The
.
Ô
• When a long distance
call has been set,
will
#/>
appears in the display.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
• If the Caller ID message
was received as a
private/unknown
number, or the message
does not have the
number, you cannot
Store/
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored
as <No Name>.
• Even if the 100 memory
locations are full, the
message will be stored
in the Phonebook.
However, the message
will be erased from the
Caller ID list.
Ô
NOTES
1
41