Table of Contents
Advertisement
network connection and setup
poRT RANGe FoRWARd (poRT mAppING) SeTUp
If you have installed an IP router with a camera connected, you must set the port range
forwarding on the IP router so that a remote PC can access the camera in it.
manual port Range Forwarding
1.
From the Setup menu of the IP router,
select <Applications & Gaming> -
<port Range Forward>.
For setting the port range forward for
a third-party IP router, refer to the user
guide of that IP router.
2.
Select <TCp> and <Udp port> for
each connected camera to the IP
router.
Each port number for the IP router
should match that specified in <Basic>
- <Ip> from the camera's Setup menu.
3.
When done, click [Save Settings].
Your settings will be saved.
CoNNeCTING To The CAmeRA FRom A ShARed LoCAL
pC
Launch <Ip Installer>.
1.
It will scan for connected cameras and
display a list of them.
2.
Double-click a camera to access.
The Internet browser starts and
connects to the camera.
You can also access the camera by typing
M
the IP address of the camera in the address bar of the Internet browser
_ network connection and setup
Advertisement
Table of Contents
