Table of Contents
Advertisement
Sound
No sound.
Distorted sound.
• Check the connections. (
• Check the settings of the connected TV, etc.
• Select the audio with "Multi Audio". (
• To output audio from a device connected with an
HDMI cable, set "HDMI Audio Output" to "On".
(
81, 90)
Cannot change audio channel.
• You cannot change the audio channel if "Digital
Audio Output" is set to "Bitstream" (
Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
• You cannot record to the disc by pressing the
[REC ¥] or timer recording.
• The disc is protected. (
• [DVD-R] [DVD-RW] [+R] [+RW] Since it will copy to
HDD temporarily, copying is not possible if there
is insufficient available capacity on the HDD.
• [DVD-R] [DVD-RW] [+R] [+RW] Copying or editing
may not be possible on these discs after
ejecting and loading the disc or switching the
unit on or to standby mode for approximately
30 times after being copied to.
• This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
14)
26, 43)
88)
74)
Timer recording does not work properly.
• Failed timer recordings are displayed in grey
with
on the Timer Recording screen. (
When you programme a timer recording, check
the screen icons. If "!" is displayed, this timer
programme may not be recorded because:
- there is not enough space left.
- the number of possible titles has reached its
maximum.
- programmes are deactivated, etc.
• Because the actual broadcast time may be
different from the time displayed on the TV
Guide, we recommend you set the start time
earlier and the end time later by some minutes,
up to a maximum of 10 minutes.
The timer recording programmed via VIERA
Connect does not work properly.
• Timer recording programmed via VIERA
Connect will be recorded with the same
conditions as those of manual timer recording,
and some functions such as "Guide Link" (
does not work.
Troubleshooting
35)
31)
101
VQT4W68
Advertisement
Table of Contents
