Appendix
B
Message List
The following messages and indications may appear for this camera. Perform the following as
necessary.
Lamp display
Lamp
The STANDBY lamp and
POWER lamp are lit.
Screen display
Message
PRESET n:OK
("n" is a preset position
number between 1 and 6)
RESET n:OK
("n" is a reset position
number between 1 and 6)
ONE PUSH WB:OP
ONE PUSH WB:OK
ONE PUSH WB:NG
Meaning and solution
Set BOTTOM switch (5) to ON.
Meaning and solution
This message appears for about 3 seconds when you store camera
settings to POSITION 1 to 6.
This message appears for about 3 seconds when you reset camera
settings stored in POSITION 1 to 6.
During the white balance adjustment in the ONE PUSH white
balance mode, this message blinks on the screen.
When the white balance adjustment has been done correctly in the
ONE PUSH white balance mode, this message is lit on the screen.
When the white balance adjustment has failed in the ONE PUSH
white balance mode, this message blinks on the screen.
45
Message List