Mounting Guide Bar And Chain - Echo QV-8000 Instruction Manual

Mounting guide bar and chain

• Remove the sprocket guard with outer side plate,
leaving the inner side plate in position.
• Mount the guide bar ensuring that the chain
tensioner fits in the hole provided.
• Holding the bar in this position, feed the chain
around the sprocket and into the guide bar groove.
• Fit sprocket guard and nuts.
Secure the nuts hand tight.
Accessories
• Special Chain Maintenance Kit
Part No. 999 440 0003 0
Includes:
Bench Grinder
Special Diamond Grinding Wheel
Depth Gauge Kit
Complete Sharpening Instructions
QV-8000 TYPE1-E
MAINTENANCE
NOTE
1. The inner side plate is fitted with a narrow
lubricating oil slot at the top.
2. The guide bar must be installed with the droop
pointing down.
3. Ensure that the chain is installed with the
cutters directed forward on the top of the bar.
4. Refer to page 18 for proper chain tension.
Clutch
• Special ECHO Detergent Bar and Chain Oil Part
No. 36880 (one gallon)
• Special Replacement Bar (12 in. angle bar 0.063
in. gauge) Part No. 359860
• Special Carbide Replacement Chain (3/8 in. pitch
0.063 in. gauge) Part No. 7562505
26
Nuts
Sprocket guard
Brake band
Guide bar studs
Guide bar
Adjustment hole
Chain