Chain Lubricant; Refill Chain Oil Tank; Adjust Automatic Oiler - Echo QV-8000 Instruction Manual

Chain saw with quikvent system

Hide thumbs Also See for QV-8000:

Table of Contents

Chain lubricant

Proper lubrication of the chain while in operation

reduces the friction to a minimum between the

chain and the guide bar, and assures faster cutting

and longer bar and chain life.

• The QuikVent™ system should be used only with

special ECHO detergent bar and chain oil.

Refer to page 26 for accessory part number.

• When refilling fuel mixture, fill up chain oil at the

same time.

(After Each Use)

1. Remove oil tank cap.

2. Add oil : ECHO high detergent oil.

3. Install oil tank cap.

(As Needed)

Turn automatic oiler clockwise to increase oil output

or counterclockwise to decrease output.

MAINTENANCE

Oil tank cap

NOTE

If chain runs dry of oil during operation, it is most

likely due to a misadjusted automatic oiler.

Increase

Decrease

Adjusting knob

QV-8000 TYPE1-E

Table of Contents

Show Quick Links

Table of Contents