Sony CMD-C1 Service Manual page 18

Portable digital cellular telephone with accessories
Hide thumbs Also See for CMD-C1:
Table of Contents

Advertisement

Important notes :
1.The IMEI sticker mounted on the main board (visible from the battery compartment) should under no condition be
removed. The IMEI number is the electronic identification of the hardware, it is also stored electronically and at no time
is a discrepancy between number on the sticker and number within the set logic allowed.
2.The antenna unit can only be lifted off as a unit to allow access to parts underneath. The antenna itself needs to be
handled with care. Damage, deformation or incorrect mounting of the patch antenna can lead to incorrect performance
and even interference of the set.
1. Remove the battery cover and the battery. Note that the
SIM card is also located in this area.
3. The lower claws can be released by gently pushing the
upper case to left/right versus the lower case.
SECTION 2
DISASSEMBLY
2. Remove 4 screws in the battery compartment. The
upper and lower case are held by a number of
claws, positions are indicated.
4. Insert the hook release jig (p/n 9-948-370-20) in
the gap between upper and lower cosmetic, as
indicated in the picture.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmd-c8

Table of Contents