Special Features - Honeywell VisionPRO IAQ Operating Manual

VisionPRO ® IAQ

Special features

Auto Changeover: When set to Auto, the thermostat automatically selects
heating or cooling depending on the indoor temperature.
Adaptive Intelligent Recovery: This feature allows the thermostat to
"learn" how long the furnace and air conditioner take to reach programmed
temperature settings, so the temperature is reached at the time you set.
Compressor Protection: This feature forces the compressor to wait a few
minutes before restarting, to prevent equipment damage. During the wait
time, the message "Wait" is displayed on screen.
Flashing message: Reminder to replace filter or UV lamp. After
replacement, press to reactivate the alert timer.
R R E E S S E E T T
Southern Away Dehumidification: Your system may be programmed to
control humidity while your house is vacant during the humid season.
Before you leave the house, press the button three times to activate
H H O O L L D D
this feature. This will control temperature and humidity to help protect your
house and possesions while you are away. (If this feature does not work,
contact your installer.)
13