Special Features - Honeywell RTH7000 Series Operating Manual

Operating Manual

Special features

Smart Response Technology: This feature allows the thermostat to "learn" how long the furnace and
®
air conditioner take to reach programmed temperature settings, so the temperature is reached at the
time you set. For example: Set the Wake time to 6 am, and the temperature to 70°. The heat will come
on before 6 am, so the temperature is 70° by the time you wake at 6. The message "Recovery" is
displayed when the system is activated before a scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few minutes before restarting, to
prevent equipment damage. During the wait time, the message "Wait" is displayed on screen.
Auto Changeover (RTH7500 only): This feature is used in climates where both air conditioning and
heating are used on the same day. When the system is set to Auto, the thermostat automatically
selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at
least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree
separation.
CAUTION: To avoid possible compressor damage, do not use Auto Changeover if the
outside temperature drops below 50°F (10°C).
69-1899ES—02 16