JVC HV-32D25EUW Service Manual page 26

HV-32D25EUW
HV-32D25EJW
Mesuring
Item
instrument
WHITE Signal
BALANCE generator
(High light)
Remote
control unit
R. LEVEL ( )
R. LEVEL ( )
SUB SCREEN Signal
WHITE generator
BALANCE
(High light) Remote
control unit
R. LEVEL ( )
R. LEVEL ( )
26
Test point
REMOTE CONTROL UNIT
1 2 3
G.
4 5 6 B. LEVEL ( )
7 8 9
B. LEVEL ( )
G. LEVEL ( )
0
MAIN SUB
screen screen
(LEFT) (RIGHT)
REMOTE CONTROL UNIT
1 2 3
G.
4 5 6 B. LEVEL ( )
7 8 9
B. LEVEL ( )
G. LEVEL ( )
0
Adjustment part
2. V/C --> • Proceed to the following adjustment after having
4. DRIVE R completed the adjustment of LOW LIGHT WHITE
5. DRIVE G BALANCE.
6. DRIVE B (1) Receive the black and white pattern signal (colour
off).
(2) Set the FULL mode.
(3) Select 2. V/C from the SERVICE MENU.
(4) Select 4. DRIVE R, and 6. DRIVE B and set each
value to initial setting value.
(5) Produce a white screen.
(6) Press the [OK] key and memorize the set value.
LEVEL ( )
2. V/C --> (1) Receive the black and white pattern signal (colour
7. TWIN HI R off).
(2) Select the Twin screen mode by pressing the [PIP]
key.
(3) Select 2. V/C from the SERVICE MENU.
(4) Select 7.TWIN HI R.
(5) Adjust so that the white level on the right screen in
the same manner as for left screen.
(6) Press the [OK] key and memorize the set value.
LEVEL ( )
Description