Convection Fan Assemblies
The convection fan assembly consists of the fan cover, fan blade, and motor. It is located on the back wall of
the oven.
Refer to the schematic in the back of this manual for circuitry for your specifi c model.
•
Models PGS968 and PGS975 utilize a 2-speed fan motor.
•
Model PGS908 does not have a convection fan.
Screws
(4)
Fan Cycle Information
Fan will only start to operate 10 seconds after the burners turn off.
The fan will only run in one direction with the following parameters:
Convection Bake
Convection Roast Continuously
PGS975 CONVECTION FAN ASSEMBLY
Outer Back Panel
Oven Insultion
Oven Liner
Fan Blade Nut
Fan Blade
Convection Fan Operation - All times are in seconds
High Speed
Low Speed
3
– 44 –
Note:
Convection Fan
Mounting Screws (3)
Convection Fan
Mounting Screws (3)
Pause/Off
7
50
0
0
Support
Oven Cavity
Repeat