Usb Configuration; Hardware Health Event Monitoring Screen - ASROCK P4i48-M User Manual

3.3.8 USB Configuration

USB Configuration
USB Devices Enabled :
USB Controller
USB 2.0 Support
Legacy USB Support
USB Controller
Use this item to enable or disable the use of USB controller.
USB 2.0 Support
Use this item to enable or disable the USB 2.0 support.
Legacy USB Support
Use this item to enable or disable the support to emulate legacy I/O
devices such as mouse, keyboard,... etc. Or you may select [Auto] so
that the system will start to auto-detect; if there is no USB device
connected, "Auto" option will disable the legacy USB support.

3.4 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
Main
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
3 0
BIOS SETUP UTILITY
Advanced
None
[Enabled]
[Enabled]
[Disabled]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
H/W Monitor
: 37 C / 98 F
: 31 C / 87 F
: 2463 RPM
: N / A
: 1.629V
: 3.306V
: 5.067V
: 11.890V
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
To enable or disable
the onboard USB
controllers.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Boot Security Exit
Select Screen
Select Item
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit