Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
USB 2.0 Header
(9-pin USB67)
(see p.8 No. 12)
Shared USB 2.0 Header
(9-pin USB4_5)
(see p.8 No. 28)
Infrared Module Header
(5-pin IR1)
(see p.8 No. 19)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8 No. 23)
(AUX1: see p.8 No. 22)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8 No. 25)
1 6
connect to the SATA HDD
power connector
1
USB_PWR
P+4
GND
AUX1
connect to the
power supply
USB_PWR
P-6
P+6
GND
DUMMY
GND
P+7
P-7
USB_PWR
1
USB_PWR
P-4
P-5
P+5
GND
DUMMY
IRTX
+5V
DUMMY
1
GND
IRRX
AUX-L
CD-L
GND
GND
GND
GND
AUX-R
CD-R
CD1
GND
+5VA
BACKOUT-R
BACKOUT-L
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
TM
ASRock I/O Plus
dates 6 default USB 2.0 ports. If
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
TM
ASRock I/O Plus
the front panel USB ports by
attaching the front panel USB
cable to this connector
(USB4_5), the USB ports 4,5 on
ASRock I/O Plus
TM
will not be able
to function.
This header supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
accommo-
. When using
Advertisement
Table of Contents
