Ginitial Setting - Sanyo VCC-6974 Instruction Manual

USING THE MENU SCREEN
G INITIAL setting
This lets you return all settings to the factory defaults.
1
Press the CURSOR (l, then d or c) button to set INITIAL to "ON" then press the
SET button.
If ON is selected, WAITING will flash underneath the word ON, then all settings will be
returned to the factory defaults.
2
When finished:
Press the CURSOR (l) button to select BACK (it will flash) at the bottom of the screen.
Then press the CURSOR (d or c) button to change BACK to END, and press the SET
button.
To return to the previous screen, select BACK then press the SET button.
OPTION/INITIAL
OPTION MENU
CURSOR SET
APERTURE
AGC
GAMMA
ZOOM
MIRROR
ON
RS-485
WAITING
INITIAL
MENU
CURSOR
SET
MENU
MENU
ON p
ON
ON
OFF
OFF
SET p
ON
WAITING
BACK
BACK
END
58
English